[Toybox] Android .config pondering.

[enh]

On Thu, May 12, 2022 at 10:55 AM Rob Landley <rob at landley.net> wrote:

> On 5/11/22 15:00, enh wrote:
> > On Wed, May 11, 2022 at 7:16 AM Rob Landley <rob at landley.net> wrote:
> >>
> >> On 5/10/22 12:04, enh wrote:
> >> > right now i think the "can't bootstrap without an existing toybox
> >> > binary" is the worst mac problem. (i think there's already a thread
> >> > about how your sed skills are too much for BSD sed...)
> >>
> >> It has a SED= environment variable so you can point it at gsed on mac,
> but
> >> GETTING gsed on the mac is outside my expertise...
> >
> > yeah, that's the "homebrew" i was talking about. (for all i know, it
> > might actually be easier to just download and build gnu sed alone, but
> > "if you're planning on using a mac for development, you'll want
> > homebrew sooner or later" has meant i've never yet not given in and
> > installed the whole thing.)
>
> You know, if we get enough of toybox running on mac and AOSP already has
> toolchain binaries...
>
> Meh, I'm not volunteering my time to make Tim Cook richer. The FSF guys can
> "properly" support the mac the same way they did cygwin.
>
> https://www.youtube.com/watch?v=g3j9muCo4o0
>
> >> > (this morning i had them ask "does toybox tar support $TAR_OPTIONS?"
> >>
> >> $ man tar | grep TAR_OPTIONS
> >> $
> >>
> >> I don't know what that is?
> >
> > i was about to celebrate (because i'd already said to them that i
> > personally _hate_ `GREP_OPTIONS` _because_ it messes with hermetic
> > builds unless you know about it and explicitly clobber it,
>
> I squashed those with env -i :
>
>   https://github.com/landley/toybox/blob/master/scripts/mkroot.sh#L5
>
> That said, it means mkroot is not supporting distcc and ccache, despite
> https://github.com/landley/toybox/blob/master/scripts/install.sh#L120
> supporting
> them...
>
> > and the
> > idea of having random other commands grow similar warts doesn't
> > exactly fill me with joy) ... but then i noticed you only said "man",
> > and this is a gnu thing, so _of course_ the man page won't mention it.
> > how else could they make you use their stupid "info" crap?
>
> It wasn't in tar --help either. :P
>
> > anyway, checking whether this is a real thing the One True Way:
> >
> > $ strings `which tar` | grep OPTION
> > TAR_OPTIONS
> > cannot split TAR_OPTIONS: %s
> >  [OPTION...]
> >
> > it's also described on the web:
> >
> https://www.gnu.org/software/tar/manual/html_section/using-tar-options.html
> >
> > (but i still think it's a bad idea, personally.)
>
> alias tar='tar $TAR_OPTIONS'
>
> >> > wrt to
> https://android-review.googlesource.com/c/kernel/build/+/2090303
> >> > where they'd like to be able to factor out the various "reproducible
> >> > tarball please" options [like in the toybox tar tests].)
> >>
> >> It supports --owner and --group and I made it so you can specify the
> numeric IDs
> >> for both with the :123 syntax so you can specify a user that isn't in
> >> /etc/passwd. (Commit 690526a84ffc.)
> >
> > yeah, that's what they want to not have to keep repeating.
>
> Is the alias solution sufficient? (In theory that lets you add this
> support to
> any command without the command having to know...)
>

(yeah, sounds like they're happy with the alias.)


> Checking the corner cases:
>
>   $ alias freep='echo $POTATO'
>   $ freep walrus
>   walrus
>   $ POTATO=42 freep walrus
>   walrus
>   $ POTATO=42
>   $ freep walrus
>   42 walrus
>
> It's not QUITE a full replacement because the prefixed environment
> variables are
> set after command line options are evaluated. (Well, technically what's
> happening is they're only exported into the new process's space and the
> command
> line is evaluated against the parent's environment variable space.)
>
> And yes, I need to get this right in toysh, where "right" matches bash...
>
> In theory I could add a global "$COMMAND_OPTIONS" that automatically picks
> them
> up for each command name, which would get grep and tar and ls and rm and
> everything. In practice, that sounds horrific and is GOING to have security
> implications somehow...
>

exactly. on the one hand "if you're going to do any $<FOO>_OPTIONS you
really should do all of them" but on the other "omg, i don't want to have
to deal with all the fallout".


> >> Meanwhile I was hitting
> >> https://lkml.iu.edu/hypermail/linux/kernel/1002.2/02231.html
> regularly. Right
> >> now I'm trying to add a coldfire toolchain to to mkroot and it's all
> >> https://www.denx.de/wiki/U-Boot/ColdFireNotes
> >>
> >> > Since gcc team seems to keep m68k issues in a very low priority, these
> >> > toolchains have the libgcc.a, libgcov.a and multilibs copied from an
> old
> >> > toolchain.
> >>
> >> Thank you Wolfgang. Thanks EVER SO MUCH. Embedded guys just stop
> engaging with
> >> "upstream" and keep using 10 year old kernels and toolchains because
> they got it
> >> to work once and don't care what the crazy people are off doing. I'm
> nuts for
> >> trying to get current stuff to work on the full range of theoretically
> supported
> >> thingies, including NATIVE COMPILING on them.
> >>
> >> Sigh.
> >
> > could be worse ... could be a _proprietary_ toolchain from a decade
> > ago. not that _that_ ever happens...
>
> Don't get me started on ARM jtag software. Either add support for your
> board and
> dongle to Open Obsessive Compulsive Disorder or admit you haven't got jtag
> support. (But no, that's now how they see it...)
>
> (And yes, however it goes one of the hardware guys sets it up for me and
> leaves
> me with dangly ribbon cables over my desk and a software package I didn't
> install/configure except maybe via rote wiki instructions, but when you're
> using
> stupidly expensive proprietary jtags there's always a finite number of
> licenses
> insufficient to the team at hand and I never get one and wind up standing
> at
> another engineer's desk debugging the problem over their shoulder. Of
> COURSE
> when you have 15 boards and 3 jtags nobody learns to use a jtag and nobody
> thinks to apply a jtag to the problem at hand, bit of a chicken and egg
> situation there isn't it?)
>
> >> >> (See, with aboriginal linux I was making my automated Linux From
> Scratch build
> >> >> work for whatever host architecture you ran it on, x86, arm, mips,
> powerpc, sh4,
> >> >> sparc, and so on. 95% of what autoconf dies boils down to 1) I was
> unaware of
> >> >> all the symbols "cc -E -dM - < /dev/null" shows you, 2) #if
> >> >> __has_include(<file>) hadn't been invented yet. But unfortunately,
> if you
> >> >> snapshot the output it tries to use the arm answers on sparc, and
> you have to
> >> >> preprepare versions for each target architecture in which case you
> might as well
> >> >> just ship binaries? So I put in the work to make it actually perform
> its stupid
> >> >> dance and get the right answers, so that when I added m68k or s390x
> it would
> >> >> mostly Just Work. Not having autoconf at all is, of course, the much
> better
> >> >> option...)
> >> >
> >> > aka "the only winning move is not to play" :-)
> >> >
> >> > +1 to that!
> >>
> >> I had a rant years ago about how configure/make/install needed to be
> replaced
> >> the way git replaced CVS. Here's a 2-part version, I'm sure I didn't
> better
> >> writeups but can't find them....
> >>
> >>
> http://lists.landley.net/pipermail/aboriginal-landley.net/2011-June/000859.html
> >>
> http://lists.landley.net/pipermail/aboriginal-landley.net/2011-June/000860.html
> >>
> >> Unfortunately, all I'd seen when I wrote that was a lot of svn and
> perforce, and
> >> not a real proper "everybody moves to the new thing and universally
> agrees its'
> >> better" complete rethink the way git finally rendered cvs properly
> irrelevant.
> >> And sadly, that's STILL the case. (Otherwise we wouldn't have this
> >> cmake/ninja/kaiju cycling every 5 years with the kernel still using
> gmake.)
> >
> > i think the trouble is that no-one's found the "big thing" here that
> > git was able to offer. i don't think we're in the git/bk/bzr/hg/...
> > phase, i think we're still in the cvs/svn phase.
>
> +1 to that!
>
> > version control also had the advantage that you could use the same one
> > for all languages; every individual language community seems to have a
> > strong preference for "their" build system, even if/though it's
> > useless for everyone else.
> >
> > i wouldn't hold my breath for this getting any better before we're all
> retired.
>
> A big advantage of scripting languages is you don't build. You run the
> source
> code, there's no "make" step.
>
> Sigh, back before Eric Raymond succumbed to Nobel Disease (he didn't even
> need
> to win the award, but neither did Bill Joy, Richard Stallman, Richard
> Dawkins...) we were working on a paper about the two local peaks in
> language
> design space, and how C was kind of the "static everything, implementation
> completely transparent" hill and scripting languages covered the "dynamic
> everything, implementation completely hidden" hill, and in between you had
> a
> no-mans-land of languages that tried to half-ass it and leaked
> implementation
> details up through thick layers of abstraction.
>
> C exposes all the implementation details and gives the programmer complete
> manual control of everything (including resource allocation), which is a
> tedious
> but viable way of working. Even stuff like alignment and endianness are ok
> as
> long as you avoid using libraries that make assumptions: the programmer
> gets to
> make all their own assumptions, and when it breaks you get to keep the
> pieces
> and weld them back together in a new shape.
>
> In something like Python, everything is reference counted and you can call
> a
> method on an object that isn't there, catch the exception, ADD THE METHOD
> (modifying the existing object), and then retry. Your container type is
> based on
> a dictionary, which might be a hash table under the covers, or might be a
> tree,
> or even a sorted resizeable array it's binary searching to look stuff up
> in...
> and it doesn't MATTER because it's completely opaque and just works. They
> could
> change HOW it works under the covers every third release and it's not your
> problem, the implementation details never leak into the programmer's
> awareness
> except as performance issues, and that you can just throw hardware at.
>
> It was a long paper, we wrote at least 2/3 of it before our working
> relationship
> broke down circa 2008. I'm still kind of sad we didn't get to finish it...
>
> Anyway, the point is people working in python/ruby/php/javascript/lua/perl
> don't
> need a make replacement, except for any native code they're doing.
>
> > (i'll let the reader decide for themselves whether rpi pico
> > introducing embedded folks to cmake is a positive step or not :-) )
> >
> >> Rob
> >
> > P.S. since i had a few minutes before my next meeting, i gave in and
> > built gnu sed from source ... it took literally _minutes_ to run
> > configure on this M1 mac, and then a couple of _seconds_ to actually
> > build. so so wrong...
>
> I know!
>
> https://landley.net/notes-2009.html#14-10-2009
>
> Back under Aboriginal Linux, I was running a build system under qemu that
> used
> distcc to call out to the cross compiler running on the host (through the
> virtual 10.0.2.2->host 127.0.0.1 thing), which moved the heavy lifting of
> compilation outside the emulator and let me do about a -j 3 build. (The
> QEMU
> system would preprocess the file, stream out the resulting expanded.c,
> read back
> in the .o file, and then link it all at the end. I was looking at using
> tinycc's
> preprocessor instead of gcc's because that might let me do more like -j 5
> builds. QEMU used a single host processor so you didn't usefully get SMP
> within
> the VM.)
>
> This meant the actual COMPILE part was reasonably snappy, but the configure
> stage could literally take 99% of the build time. So what I did was
> statically
> link the busybox instance that was providing most of the command line
> utilities,
> which sped up ./configure by 20%.
>
> (Part of this was an artifact of how QEMU works: it translated a page at a
> time
> to native code, with a cache of translated code pages. Every time an
> executable
> page was modified, the cached translated copy got deleted and would be
> re-translated when it tried to execute it. Doing the dynamic linking
> fixups not
> only deleted the translated codepages, but it reduced the amount of sharing
> between instances because the shared pages got copy-on-write when they were
> modified. These days they collate more stuff into PLT/GOT tables but that
> just
> partially mitigates the damage...)
>
> But yes, autoconf is terrible, it doesn't parallelize like the rest of the
> build
> does, 90% of the questions it asks can be answered by compiler #defines or
> are
> just TOO STUPID TO ASK IN THE FIRST PLACE:
>
> https://landley.net/notes-2009.html#02-05-2009
>
> And then of course, half of cross compiling is best described as "lying to
> autoconf". (It asks questions about the HOST and uses them for the TARGET.)
>
> Rob
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.landley.net/pipermail/toybox-landley.net/attachments/20220518/20a7c584/attachment-0001.htm>